Author |
Message |
Katherine Bakeev (katherineb)
Junior Member Username: katherineb
Post Number: 8 Registered: 12-2009
| Posted on Monday, November 12, 2012 - 8:56 pm: | |
Hi Enbo, You can use Unscrambler models with OPUS 7.0 software when used in conjunction with OLUP 9.8. All OLUP DLLs necessary for prediction are installed with OPUS 7 in the OPUS path. You will need to buy an OLUP 9.8 version (this is the only compatible with their system) from CAMO. You need to install this version on your computer in the usual path (e.g. c:\Programs�). The customer must now copy the file OLUP.SYS from this installation to the OPUS path. To use the OLUP prediction engine in OPUS, you must have an OPUS registry with QUANT or QUANTRUNTIME. You must copy ALL the model files (e.g. *.42m etc.) which belong to an Unscrambler model to the \ME_Base\Quant path. You can use this model in the Multi Evaluation Setup via Add Quant 2 Analysis. For further assistance please feel free to contact me directly: [email protected] |
Sirinnapa Saranwong (mui)
Member Username: mui
Post Number: 14 Registered: 10-2006
| Posted on Monday, November 12, 2012 - 9:50 am: | |
you will need to develop a model using Unscrambler 9.8 and you will also need an OLUP license. Please contact your unscrembler dealer for those. Afteryou get those things, please contact me ([email protected]) . I can guide you how to do it. If you do not want to purchase the OLUP and already have OPUS/QUANT, you might want to develop a PLS model using O/ QUANT. |
Enbo Feng (efeng)
New member Username: efeng
Post Number: 1 Registered: 11-2012
| Posted on Monday, November 12, 2012 - 7:24 am: | |
am using Unscrambler X to build models for NIR analyzer. Now I have to deal with a another brand NIR equipmet, Bruker. No problem I can read OPUS files into Unscrambler X. But I don't know how to export Model from Unscrambler in a OPUS "method" format, such as .q2. Please help !!! |