Author |
Message |
Jack Graus (jackgraus)
New member Username: jackgraus
Post Number: 4 Registered: 7-2012
| Posted on Wednesday, August 01, 2012 - 7:03 am: | |
The issue is solved: Crystal reports wasn't installed. Regards Jack |
Jack Graus (jackgraus)
New member Username: jackgraus
Post Number: 3 Registered: 7-2012
| Posted on Wednesday, August 01, 2012 - 7:01 am: | |
The issue is solved: Crystal reports wasn't installed. Regards Jack |
Ole Rasmussen (oler)
New member Username: oler
Post Number: 5 Registered: 2-2009
| Posted on Friday, July 13, 2012 - 8:29 am: | |
Jack Make sure that in the system profile to set the path to the folder - sounds like you done that. Next make sure you have created a report profile ---- use the one called LIMS_Export_Complete --- this exports all the info. Next you have to hook up the Report Template as well as check the LimS_Exort check box --- this must be done for every product --- so right_click each product and select <edit> - then hook up the report template and turn on the LIMS export. If this dont work then email me on [email protected] |
Jack Graus (jackgraus)
New member Username: jackgraus
Post Number: 2 Registered: 7-2012
| Posted on Friday, July 13, 2012 - 8:07 am: | |
Hi Guido, I did try both with setting and without setting the 'Enable LIMS Export promt'. But no result. Regards Jack |
Guido Bombi (guido)
New member Username: guido
Post Number: 3 Registered: 1-2008
| Posted on Friday, July 13, 2012 - 7:58 am: | |
Dear Jack, be sure that the "Enable LIMS Export Prompt" box is checked in "System Profile". |
Jack Graus (jackgraus)
New member Username: jackgraus
Post Number: 1 Registered: 7-2012
| Posted on Friday, July 13, 2012 - 7:39 am: | |
We plan to export and import NIR sample data between ISIscan and ERP system (SAP) by file. The import inti ISIscan is working now. Sample data in a CSV file is picked up and NIR measurement is started automatically and saved into ISIscan. In the export profile the export template LIMS_export_basic is set with a valid directory. In the product database the flag 'Automatic LIMS export' is set. However, no export file is created and there no error logging. Any help is appreciated, regards Jack |